Brilliant Evolution Wireless Stick On Puck Lights – Dollhouse and Playroom Shelf Lighting for Children
Brilliant Evolution Wireless Stick On Puck Lights – Dollhouse and Playroom Shelf Lighting for Children
Couldn't load pickup availability
Why you'll love it
- No wiring or electrician needed—true cordless installation with removable adhesive pads protects renter deposits
- Color-changing capability (3 whites plus 14 colors and 4 dynamic modes) lets one fixture serve task, mood, and holiday decor
- Auto-off timer (30/60/180/360 min) prevents dead batteries and gives peace of mind in kids' rooms
- Two control methods—remote for across-the-room use and tap for quick on/off without searching for the clicker
- Multi-pack value (2 or 6 units) with one remote synced to all lights simplifies whole-room coverage at low cost
Perfect for
- Wire-free under-cabinet kitchen task lighting for renters who can't hardwire fixtures
- Accent and mood lighting inside wine cabinets, curio displays, or backlit shelves using the 14 color options
- Night light for kids' rooms with tap-on control and auto-off timer so parents don't worry
- Closet and pantry illumination where pulling a wire or hiring an electrician isn't practical
- Display lighting in dollhouses, models, or seasonal decor setups that need frequent repositioning
Tips:
The puck lights needed 3 AA batteries, please kindly note that the working hours depends on different battery brands, battery capacity and brightness. We recommended you the good higher capacity AA batteries or rechargeable batteries.
Premium Double-sided Adhesives
No damage to furniture or walls, Stick anywhere with confidence !
Use our new type removable & traceless (furniture safe) adhesive pads to stick on any smooth surfaces in seconds, our removable adhesive is favorable in case you want to remove these puck lights in the future.
Manual- Individual Control
Short Press:
- turn on the light
- switch light color
- switch light mode
Long Press
- turn off the light
Remote- Group Control
- turn On / Off
- change color
- switch Light mode
- light dimming
- timing function
What's in the box?
- LED puck light x2
- remote x1
- User manual x1
- adhesive pad x4
- screws x4
Adhesives pads installation
Use our new adhesive pads to stick on any smooth surfaces in seconds. What's more, our adhesive is furniture safe when you want to remove these puck lights in the future.
Screws installation
When the place can not use the adheasive to stickup the puck light, they are also available with screws.
Multicolor
These small lights provide 3 kinds of white light: warm white, nature white, cool white, and other 13 colorful light in static mode, it's a perfect light decor for your wine cabinet, display case, kids dollhouse, etc.
More scenes for these puck lights waited for you to be discovered.
More Option LED Puck Lights from Onumii
Product Information
Battery Powered Lights - These LED lights require no wiring, making them safe and easy to use. Each puck light operates on 3 AA batteries (not provided). Remote Control - With the remote, you can operate several lights at the same time, customize your favorite light color and light modes. Tap Individual Control - Short press the front cover to turn on or change light color, long press (2 seconds) to turn off. 3 Brightness Levels -Quick set the brightness level to 30%, 70%, 100% by using the remote (if need extra remote, please search: B0CXSDK3XZ) Timer Off - Avoid forgetting to turn off the lights, the auto-off timer is 2 hours by default, and you can set timer off at 30, 60, 180 or 360 minutes by remote. Multi Coloured - Besides the most used warm, nature and cool white, these small lights provide other 14 colorful light and 4 dynamic light modes, it's a perfect light decor to your wine cabinet, display case, kids dollhouse, etc. Easy Installation -Use the new style removable & traceless double-sided adhesive pads to stick on any smooth surfaces in seconds, or fix them with the screws when necessary.
Features & Specs Room Type Kitchen, Bedroom, Living Room, Kids, Classroom, Locker, Storage Room, Display case, etc. Specific Uses For Product Cabinet, Under Counter, Up Lights, Back Lights, Spot Lights Indoor Outdoor Usage Indoor Power Source Battery Powered Other Special Features of the Product Tunable white, Color Changing, Dimmable, Cordless Control Method Remote Light Source LED Number of Light Sources 2 Voltage 4.5 Volts (DC) Light Color white Lighting Method uplights/downlights Wattage 1 watts Controller Type Remote Control Switch Type Push Button Water Resistance Level Not Water Resistant Brightness 100 Lumen Efficiency 100.00 lumens/watt Mounting Type Adhesive Pads or Screw fix Fixture Type Removable Style Color Black Style Name Modern Light Fixture Form Puck Shape Round Shade Color Black Measurements Item Dimensions L x W x H 2.95"L x 2.95"W x 1.2"H Item Weight 5.6 Ounces Number of Items 2 Unit Count 2 Count
Frequently Asked Questions
Is this night light safe to leave on in my toddler's room all night?
Yes. The LEDs run cool to the touch, there is no flame, no hot bulb, and no glass to break. The auto-off timer can be set to 30, 60, 180, or 360 minutes, so the light turns itself off once your child is asleep, which also saves battery life.
Will my child be able to turn it on and off easily without getting out of bed?
Yes. A short tap on the lens powers the puck on and cycles through colors, and a 2-second long press turns it off. There are no small switches, no apps, and nothing to fumble with in the dark. The included remote is also simple enough for older kids to use independently.
Can the color changing feature be set to a soft warm night light color?
Yes. Choose the warm white setting for a traditional soft glow, or pick a color from the 14 RGB options such as soft amber, pink, or blue to match your child's nursery theme. The 30% brightness preset is gentle enough to sleep with.
Is the surface of the puck safe if my baby touches it?
The LED puck surface stays cool even after hours of use, so it will not burn little fingers. It is also free of sharp edges, and the housing is a sealed ABS plastic that contains the batteries so they cannot be accessed by curious hands.
Will this help my child who is afraid of the dark?
Many parents use these pucks as a comfort night light. Set it to a warm white at 30% brightness, place it on a low shelf or under the bed frame, and use the auto-off timer so your child falls asleep with light on and wakes in a fully dark room.
Is this appropriate for a nursery or should I wait until my child is older?
It is appropriate from newborn stage onward. Mount it out of reach on the wall or under a high shelf using the adhesive pad, and use the remote exclusively to operate it so there is no need for your baby or toddler to interact with the puck directly.
Can I use it in my child's playroom for arts and crafts and reading?
Yes. Set the puck to the natural or cool white at 100% brightness for clear task lighting at a play table, craft corner, or reading nook. When playtime is over, switch to a colored mode for a calming wind-down.
How does this compare to a plug-in night light for a kids room?
A plug-in night light takes up an outlet, often glows a single dim color, and cannot be repositioned. This puck offers tunable brightness, three whites, 14 colors, a timer, and can be mounted anywhere, including closets, under bunks, and inside play tents.
How does this compare to a wax candle or oil warmer for ambiance in a kids room?
Unlike a wax candle or oil warmer, this puck produces no flame, no smoke, no hot wax, and no scent that could trigger allergies. Parents can leave the room with the light on and know there is zero fire risk.
How does this compare to a string of fairy lights for a kids bedroom?
Fairy lights are charming but most plug-in varieties have a hot bulb and a cord that tangles. These battery pucks are safer, easier to install, and include a remote and timer that fairy lights typically lack.
I am worried the adhesive will fail and the puck will fall on my child; is the mount secure?
On clean, smooth, sealed surfaces such as painted drywall, laminate, or finished wood, the included traceless adhesive pads hold the puck firmly in place. For added peace of mind in a high-traffic kids area, you can also use the included screw fix option.
Are the batteries a choking hazard if my child gets into the puck?
The battery compartment is secured with a screw, so small hands cannot pry it open. We still recommend mounting the puck out of reach of infants and toddlers as a general safety practice.
How do I install the puck lights on my cabinet or shelf?
Peel the protective film from one side of the included traceless adhesive pad, press it firmly onto the flat back of the puck, peel the second film, and press the puck onto a clean, dry, smooth surface for 30 seconds. Wait at least one hour before hanging weight on it. For a more permanent install, use the included screws to mount the puck through its keyhole slot.
How do I pair the remote to multiple puck lights?
The remote is paired at the factory. To re-sync, press and hold the power button on the remote for 5 seconds within 10 seconds of installing fresh batteries in the puck. The puck will flash to confirm the pairing. One remote can control an unlimited number of pucks in range.
How long do the batteries last and what type do I need?
Each puck uses 3 AA batteries (not included). At 30% brightness with the 30-minute auto-off timer, expect roughly 80 to 100 hours of use per set of alkaline batteries. At 100% brightness with no timer, expect closer to 20 to 30 hours. Rechargeable AA batteries work well and can lower long-term cost.
Do these puck lights work with rechargeable batteries?
Yes. Any standard AA rechargeable battery, including NiMH 1.2V cells, works in the puck. For best brightness and runtime, we recommend 1.5V lithium or high-capacity NiMH cells rather than lower-voltage 1.2V alkaline rechargeables.
Will these work on a textured, wood-grain, or porous surface?
The adhesive pads perform best on smooth, sealed surfaces such as painted drywall, laminate, metal, glass, and finished wood. On raw wood, brick, stucco, or heavily textured surfaces, the adhesive may not hold reliably, and we recommend using the included screw mount instead.
What is included in the box and what do I need to buy separately?
Each box contains the puck lights, the remote control, traceless adhesive mounting pads, screws and anchors for hard mounting, and a quick-start guide. You will need to supply 3 AA batteries per puck, which are not included. The 6-pack includes one remote for all pucks.
Can the pucks get wet or be used in a bathroom or outdoors?
No. These pucks are rated for indoor dry locations only. They should not be installed in direct contact with water, in a shower, outdoors, or in a freezer. For outdoor or wet locations, look for a product with an IP44 or higher rating.
What is the warranty and what if a puck stops working?
The product is backed by a standard manufacturer warranty against defects in materials and workmanship. If a puck fails under normal use, contact the seller with your order details for a replacement. Keep your packaging and receipt until you have confirmed the lights work as expected.
What is the difference between battery puck lights and hardwired under-cabinet LED strips?
Hardwired LED strips are brighter, longer, and can illuminate an entire countertop in a continuous line, but they require an electrician, a transformer, an outlet or junction box, and a permanent commitment to the install. Battery puck lights are shorter and dimmer per unit, but they require no wiring, install in minutes, are removable, and are ideal for renters, small spaces, and accent lighting where flexibility matters.
