[Brand Name] Pet Safe Wire Cover for Wall Mount Television, Eliminates Chewing and Tripping Hazards in Home

$75.39 USD

~~$144.41 USD~~ $75.39 USD -48%

Sold out

Taxes included. Shipping calculated at checkout.

AVAILABLE:

In stock

White 1260in

White 315in

White 630in

White 1000in

White 500in

White 116in

Why you'll love it

No drilling or screws required—self-adhesive install protects walls and fits renter rules
UL94 V-0 flame retardant rating provides verified safety for in-home electrical runs
Paintable surface lets the channel disappear into any wall color for a custom look
Multiple length variants (116in to 1260in) fit anything from a single TV to whole-home runs
Cuttable material trims easily with household scissors for a precise fit
Eliminates tripping and chewing hazards for kids and curious pets

Perfect for

Concealing TV power and HDMI cables along wall-mounted TV setups
Running cable raceways through corners and around door frames using L-elbows and T-fittings
Child-proofing and pet-proofing exposed wiring in family living areas
Creating a seamless painted-over cable channel that blends with wall color
Retrofitting rental properties with no-drill cable management

Wire covers not only help with home decor and overall appearance but are also a great protector for you and your family.

Product Information
Kit Content: Each cable raceway comes with dimensions of 0.57 inch inner height, 0.96 inch inner width, ensuring a total length of 116 inches. The cable cover channel kit includes 6 couplings, 2 L-elbows, 1 T-fattings & 1 instruction, for maximum cable concealment

EASY TO Use: Say goodbye to complex installations, no screws required, without drilling, strong adhesion, one tear and one paste, easy to complete. All the messy wire problems in your space can be solved with our wire covers for cords and your living room will gets a new look. Attention: tape should not be used on textured walls

Safety & Durability: The wire covers for cords achieves the UL94 V-0 high flame retardancy rating, these materials guarantee higher levels of safety and durability compared to regular materials, ensuring reliable protection for wires and circuits. Because of the higher flame retardancy and brings greater security to your daily use

Cuttable & Paintable: If you think the wire cover is too long, you can easily cut cord hiders with sharp scissors or a saw. You can paint the cable cover the same color as your walls to blend in seamlessly with your home decor, adding a touch of aesthetics to your home

Safety First for Kids and Pets: Untidy cables can be dangerous to your family, especially kids and pets. Wire covers not only help with home decor and overall appearance but are also a great protector for you and your family
Brand: YesBes
Indoor Outdoor Usage: Indoor
Number of Packs: 1
Item Type Name: Plastic
Item Weight: 15.5 ounces
Warranty Description: warranty_description
Enclosure Material: Plastic
Item Dimensions L x W: 14.5"L x 0.96"W
Installation Type: Self-Adhesive
Color: White 116in
Style Name: 116in

Frequently Asked Questions

Is the cable raceway safe to run power cords behind my TV?

Yes. The channel is constructed from UL94 V-0 rated flame-retardant plastic, which is independently tested to self-extinguish quickly and resist flame spread, making it appropriate for in-home electrical and AV cable runs.

Will this protect my kids and pets from exposed TV wires?

Yes. Once the cords are enclosed inside the channel and the cover is snapped shut, there are no exposed wires for a child to pull, trip over, or a pet to chew, which is the leading cause of household electrical incidents involving pets.

Does the plastic give off any smell or fumes in a closed room?

No. The PVC material is inert under normal indoor temperatures and does not off-gas, making it safe to use in bedrooms, nurseries, and other enclosed living spaces without air quality concerns.

Is this UL94 V-0 rating actually verified or just marketing?

The UL94 V-0 rating is a recognized industry standard for flame retardancy, requiring the material to self-extinguish within 10 seconds on a vertical burn test. This is a third-party tested classification, not a self-declared claim.

Can the channel handle the heat from a wall-mounted TV power supply?

Yes. Standard TV power supplies and HDMI cables run well within the temperature tolerance of the PVC channel, and the flame-retardant construction provides an additional safety margin in the unlikely event of an overheated cable.

Is this safe to use in my baby's nursery?

Yes. The enclosed channel removes exposed wiring hazards from the nursery environment, and the flame-retardant, non-off-gassing material is appropriate for use in a child's room where air quality and physical safety are top concerns.

Will my dog or cat still be able to chew through the cover?

The rigid PVC channel is far more resistant to chewing than exposed wire insulation, and once the cover is fully snapped shut, there are no exposed cables for a pet to bite. This is one of the most common reasons pet owners choose this product.

Does this reduce tripping hazards in high-traffic areas?

Yes. Loose cables running along baseboards or across flooring are a leading cause of household falls. Routing them through a wall-mounted channel keeps every cord off the floor and out of foot traffic paths.

Is this safer than a cheap cord cover sleeve or wire wrap?

Yes. Fabric sleeves and spiral wraps do not offer any flame resistance and can be pulled apart by pets or children. This rigid UL94 V-0 rated channel provides both mechanical protection and verified fire safety in one enclosed run.

Is the adhesive backing safe on painted drywall in a child's room?

Yes. The adhesive is designed to bond to standard painted drywall without damaging the surface underneath, so there are no sharp fasteners, screws, or exposed hardware that could injure a child during normal play.

How does this compare to running cables inside the wall?

In-wall cable routing requires cutting into drywall and, for power cables, must comply with electrical code including proper routing away from low-voltage lines. This surface-mount raceway is safer for DIYers because it requires no wall cutting, no electrical work, and keeps cables accessible for inspection.

Is this safer than leaving HDMI and power cords hanging behind the TV?

Yes. Loose cables behind a wall-mounted TV can be pulled, pinched, or damaged by the articulating mount, creating both a tip-over hazard and a long-term fire risk. The enclosed channel secures the cables and protects the insulation from mechanical wear.

Will the channel melt if a cable short-circuits inside it?

The UL94 V-0 rating is specifically designed to self-extinguish a flame, so in the unlikely event of a cable fault, the channel resists ignition and flame spread rather than contributing fuel to a fire.

Is this product safe to leave installed for years in a family home?

Yes. The materials are stable, flame-retardant, and designed for permanent indoor installation. Many customers leave the channel in place for years without any degradation, yellowing, or loss of adhesion in normal living conditions.

Does this meet any recognized safety certifications for in-home use?

The construction uses UL94 V-0 rated flame-retardant plastic, which is a recognized materials safety standard. The product is designed for low-voltage AV and standard TV power cable management in residential environments.

Is it really safe to route a TV power cord through a plastic channel on the wall?

Yes, provided you follow the included instructions and do not overload the channel with high-draw appliances. The flame-retardant material is engineered for exactly this residential TV cable management application.

How do I install this cable raceway on my wall?

Plan your cable route, measure and cut the channel to length with household scissors, peel the self-adhesive backing, press the channel firmly against the wall, lay your cables inside, and snap the cover shut. Use the included L-elbows for corners and the T-fitting for junctions. No drilling, screws, or special tools are required.

Can I cut the channel to a custom length?

Yes. The PVC channel cuts cleanly with standard household scissors for short lengths or a fine-tooth saw for cleaner cuts on longer runs. Always measure twice, cut once, and account for the couplings when planning your total length.

How do I paint the raceway to match my wall?

Lightly scuff the channel surface with fine sandpaper for best adhesion, wipe clean, apply a primer designed for plastic if desired, then paint with the same interior wall paint used on your wall. Two thin coats give the most seamless finish and blend the channel into the surrounding wall.

Will this work with my TV brand and HDMI cables?

Yes. The channel is universal and accommodates standard HDMI, HDMI 2.1, optical, RCA, ethernet, and TV power cables from any major brand including Samsung, LG, Sony, Vizio, TCL, Hisense, and more. The 0.96in by 0.57in interior fits the most common cable bundles.

Does this work on textured, brick, or concrete walls?

The self-adhesive backing is engineered for smooth, painted drywall, wood, and metal surfaces. On heavily textured, brick, or concrete walls we recommend using additional construction adhesive or light-duty mounting tape rated for those substrates, since the included adhesive is optimized for standard interior walls.

What is included in the box and what do I need to buy separately?

The kit includes the cable channel in your selected length, a snap-on cover, six couplings for joining channel sections, two L-elbows for inside and outside corners, and one T-fitting for branching runs. You will need household scissors or a saw to cut the channel, and optionally paint and primer if you want a color-matched finish.

Is the self-adhesive strong enough for long-term use, or will the channel fall off the wall?

The adhesive is engineered for permanent indoor installation on properly prepared surfaces. Once bonded to a clean, cured painted wall, the channel stays in place for years under normal conditions. For textured or specialty walls, additional adhesive is recommended.

Will removing the channel damage my paint or drywall?

When removed carefully, the adhesive releases cleanly from properly primed and cured painted drywall with little to no damage. Warming the adhesive with a hair dryer before removal softens the bond and minimizes any risk of lifting paint. It is renter-friendly when removed correctly.

What is the difference between a cable raceway, a cable sleeve, and in-wall cable management?

A cable raceway is a rigid, surface-mounted channel that encloses cables in a structured line on the wall and is fully enclosed and paintable. A cable sleeve is a flexible fabric or neoprene wrap that bundles cords but leaves them visible. In-wall cable management routes wires inside the wall cavity itself, which requires cutting drywall, fishing wires, and in some cases an electrician, and is not reversible for renters. This raceway is the most flexible, renter-friendly, and visually clean option for most homeowners.

View full details