Anwenk Adjustable Table Levelers to Prevent Furniture Tipping and Floor Scratches, Family Safe Furniture Foot Kit 4 Pack
Anwenk Adjustable Table Levelers to Prevent Furniture Tipping and Floor Scratches, Family Safe Furniture Foot Kit 4 Pack
Couldn't load pickup availability
Why you'll love it
- Commercial-grade 1320 lb total load capacity handles heavy sofas, dining tables, and equipment
- Universal nylon base plus included felt pads means one product works on hardwood, tile, and carpet without buying extras
- Wide 3/4" to 1 3/4" height adjustment solves both slight wobble and significant floor unevenness
- Complete kit with T-nuts and screws means no extra hardware store trips
- Simple screw-in installation for pre-threaded legs or basic pre-drilling for solid wood, accessible to non-professionals
- Stops furniture from sliding on smooth floors and prevents floor scratches
- TIG welding compatibility for a clean flush appearance on custom steel legs
- Screw holes are chamfered to accept flat head screws
- Worked perfectly for spreading/leveling an antique oak desk refinished as a bathroom vanity
- Easy to install on a planer/jointer stand built with 2x4 framing
- Padded feet work well for sliding on wood floors without scratching
- Good hefty, sturdy quality rather than cheap thin steel
- Works better than bolt-on stove levelers because they take up less room under blackstone-type griddles
Perfect for
- Stabilizing wobbly chairs, tables, and sofas on uneven flooring
- Leveling cabinets and bookshelves flush against walls to prevent gaps
- Raising furniture 3/4" to 1 3/4" to clear rugs, vents, or robot vacuums
- Protecting hardwood and tile floors from scratches and chair-drag noise
- Refurbishing secondhand furniture with damaged or missing original feet
- Leveling a 9ft slate pool table on unlevel concrete in a man cave
- Adjusting a workbench on a garage floor with significant unevenness
- Welding the mounting socket to steel tube stock legs for an epoxy table
- Leveling a floor-to-ceiling cat tower by applying back pressure between floor and ceiling
- Building a homemade gun cleaning/sighting stand from scrap wood
- Leveling an outdoor bar on a deck
Featuring-
- Easy to install and adjustable height as your require;
- Suitable for using them in residential or working area;
- Work out perfectly as replacement in your table, office table, sofa, couch, ottoman bench, chair, bed and more!
- Separated felt pads allows your furniture to glide smoothly and quietly.Prevent scratches, scrapes or harsh grating.
NOTE: Leveling feet allows you to adjust the furniture feet height from 3/4” to 1 3/4” for maximum support and adjustability.
More Features...
Support max 1320LBs, universal nylon bottom for all type of floors, perfect choice for heavy furniture.
Steel thread insert and t-nuts, commercial quality standard with long service life.
All black including T-nuts and screws. Our leg levelers can fix your furniture quickly while not compromising the look!
Work on Indoor&outdoor.
Work on heavy furniture.
Leveling feet for ALL wood leg feet.
Height Adjustable for your table desk.
Product Information
✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease ! ✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread; Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. ✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs! ✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/ tile/ carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises. ✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height. T-nuts and installation screws are included.
Brand Anwenk Color 4pack Leveling Feet Size 1.3 inches x 1.5 inches x 1.3 inches Style Modern 3/8"-16 thread furniture leveling feet Item Weight 0.5 Pounds Product Care Instructions Wipe with Dry Cloth Leg Style round Furniture Finish Black Number of Pieces 24 Weight Limit 1320 Pounds Manufacturer Anwenk Product Dimensions 1 x 1 x 3 inches Item Weight 8 ounces
Frequently Asked Questions
Will these levelers keep a tall bookshelf from tipping onto my child?
Yes. The 1320 lb load capacity and rigid steel socket let you adjust each foot precisely, so you can level the unit and apply a slight rearward lean into the wall. For tip-over safety in homes with children, the bookshelf should also be anchored to the wall with an anti-tip strap.
Are the materials safe around pets who chew on furniture legs?
The exposed parts are steel and nylon with felt pads. The 3/8-16 threaded steel insert sits inside the leg, so pets only contact the inert nylon base and felt, neither of which presents a chewing hazard in normal household use.
Can I use these to stabilize a cat tower that presses between floor and ceiling?
Yes. Customers use the 1 3/4 inch maximum height to apply back pressure between floor and ceiling, wedging a floor-to-ceiling cat tower in place without damaging drywall.
Will the levelers fail under a heavy granite-top dining table?
No. With a 330 lb per foot rating and 1320 lb total capacity across four feet, the levelers are rated for heavy stone-top tables when the load is distributed across all four feet.
Do the levelers prevent chairs from sliding out from under someone sitting down?
Yes. The nylon base grips smooth floors and prevents the chair from sliding when someone sits down, reducing the risk of a fall or sudden tip on hardwood or tile.
Are these safer than stacking wood shims under a wobbly chair?
Yes. Wood shims can split, shift, or splinter, creating sharp edges and unstable footing. The steel and nylon levelers lock in place once adjusted, eliminating the trip and splinter risk that comes with loose shims.
Will the nylon base slip on a wet kitchen floor?
The nylon base is floor-safe and provides more grip than hard plastic or metal feet. In areas that get wet, dry the floor under the furniture before adjusting the levelers, and use the included felt pads for additional grip on smooth tile.
Can I trust the 1320 lb load rating for a pool table?
Customers have used these levelers to level a 9 ft slate pool table on uneven concrete, and the 330 lb per foot rating covers the distributed load across all four corners. Always confirm the leveler is fully engaged into the leg threads before applying full weight.
Do the levelers eliminate the wobble that makes a ladder-back chair feel unsafe?
Yes. By adjusting each foot independently, you can compensate for uneven legs or an uneven floor and stop the wobble at the source rather than relying on the user to balance.
Will the steel insert rust if used on a damp basement floor?
The steel insert sits inside the furniture leg, away from direct floor moisture. The exposed base is nylon, which does not rust. For very damp basements, sealing the leg opening helps extend the life of the internal insert.
Are the levelers a choking hazard if a felt pad comes loose?
The felt pads press-fit into the base and are not designed to detach in normal use. If a pad does come loose, its size makes it unlikely to be a choking hazard, and you can reattach it with a small dot of adhesive.
Can I use these to stabilize a gun cleaning stand I built from scrap wood?
Yes. Customers have used these levelers on homemade gun cleaning and sighting stands to get a perfectly plumb and level work surface, which matters for sighting work.
Is the base smooth enough that a child won't get cut if they bump into it?
Yes. The 1 3/8 inch nylon base has rounded edges and a soft floor-contact surface, so it is safer around crawling children and bare feet than metal glides or hard plastic feet.
Will the levelers hold a heavy commercial espresso machine on a café counter?
The 330 lb per foot rating covers most commercial espresso machines when the load is shared across all four feet. For very heavy equipment, verify the leg construction can support a threaded insert before installing.
How do I know the leveler is locked and safe to load?
Turn the adjustment wrench until the base contacts the floor, then continue rotating until you feel firm resistance. The T-nut or weld locks the insert inside the leg, so the leveler cannot back out under normal use.
Can a toddler pull the leveler out of the leg?
No. Once the T-nut is installed inside the leg, the insert is captive and can only be removed by unscrewing it from inside the leg. The exposed base is fixed to the insert and does not detach.
How do I install the Anwenk leveling feet on a pre-threaded furniture leg?
Screw the steel insert directly into the existing 3/8-16 threaded leg by hand, then thread the nylon base onto the insert. Adjust height by turning the base with the included wrench until the furniture is level and the wobble stops.
How do I install the levelers on a solid wood leg with no existing thread?
Drill a 3/8 inch hole in the bottom center of the leg, drop in the included T-nut from inside the leg cavity or from below if the leg is solid, then screw the steel insert into the T-nut. Attach the base and adjust as needed.
How do I weld the socket to a steel tube leg for a custom build?
The mounting socket can be TIG welded directly to steel tube stock. Use the screw holes to clamp the socket in place during fitting, then weld around the base. The chamfered screw holes accept flat head screws for a flush mount when not welding.
Will these levelers fit my furniture that uses a different thread size?
The kit uses a standard 3/8-16 thread, which is the most common furniture leg thread in North America. If your leg uses a finer or coarser thread, you will need a thread adapter or a different leveler model.
Are these compatible with IKEA-style adjustable legs or signature feet?
IKEA legs use a mix of metric thread sizes, most commonly M8 or M10. These levelers use the 3/8-16 standard thread, so they will only fit IKEA legs that use that exact thread or that you can re-tap to 3/8-16.
What is included in the box?
The 4-pack includes four steel threaded inserts, four nylon bases with felt pads, T-nuts and mounting screws for non-threaded legs, and an adjustment wrench. Everything needed for both threaded and basic wood installation is in the kit.
Are the levelers safe for hardwood, tile, and laminate floors?
Yes. The 1 3/8 inch nylon base is floor-safe on hardwood, tile, laminate, and vinyl, and the included high-density felt pads add an extra layer of protection for hardwood and other soft surfaces.
Will the levelers rust or stain the floor over time?
The exposed base is nylon, which does not rust or leave residue. The steel insert sits inside the leg and is not in contact with the floor, so there is no rust risk to the flooring surface.
How do adjustable leveling feet compare to furniture cups or fixed glides?
Furniture cups and fixed glides offer no height adjustment and only work on flat floors. Adjustable leveling feet let you dial in exact height on each corner, so the piece sits truly level even on significantly uneven floors, and they support far higher loads than cups or glides.
